The HS-322HD Standard Heavy Duty Servo utilizes Hitec’s revolutionary Karbonite™ gear train which is four times stronger than our standard white nylon gears, and even after hundreds of thousands of cycles they don’t show any signs of wear. Karbonite™ gears and Hitec's custom IC make the HS-322HD a great choice for an economical sport servo.
€24,72 (€20,26 + IVA)
| Dimensions | 1.57" x 0.78" x 1.43" (39.88 x 19.81 x 36.32mm) |
|---|---|
| Product Weight | 1.52oz (43g) |
| Output Shaft Style | 24 tooth (C1) spline |
| Voltage Range | 4.8V - 6.0V |
| No-Load Speed (4.8V) | 0.19sec/60° |
| No-Load Speed (6.0V) | 0.15sec/60° |
| Stall Torque (4.8V) | 42 oz/in (3.0 kg/cm) |
| Stall Torque (6.0V) | 51 oz/in (3.7 kg/cm) |
| Max PWM Signal Range (Standard) | 553-2450μsec |
| Travel per µs (out of box) | .106°/μsec |
| Max Travel (out of box) | 201° |
| Pulse Amplitude | 3-5V |
| Operating Temperature | -20°C to +60°C |
| Current Drain - idle (4.8V) | 7.4mA |
| Current Drain - idle (6.0V) | 7.7mA |
| Current Drain - no-load (4.8V) | 160mA |
| Current Drain - no-load (6V) | 180mA |
| Continuous Rotation Modifiable | Yes |
| Direction w/ Increasing PWM Signal | Clockwise |
| Deadband Width | 5µs |
| Motor Type | Cored Metal Brush |
| Potentiometer Drive | 4 Slider/Direct Drive |
| Feedback Style | 5KΩ Potentiometer |
| Output Shaft Support | Top Resin Bushing |
| Gear Type | Straight Cut Spur |
| Gear Material | Karbonite |
| Wire Length | 11.81" (300mm) |
| Wire Gauge | 25AWG |
